The MC-1000 combines the accuracy and functions of our next generation PTC-8000 temperature calibrator with V/mA and frequency functions added. The performance level is twice that of similarly priced products and will calibrate virtually any process device.
The MC-1000 also combines several DMM functions like voltage measurement to 250 V AC or DC and a continuity test function. This combination of a high accuracy calibrator along with common DMM functions makes the MC-1000 the only instrument you may ever need to maintain and calibrate your
instrumentation.
Features:
Accuracy ±0.6°C T/C ±0.3°C RTD and 0.015% electrical
Choose either read or source modes
Operates with external pressure modules
10 T/C types; 8 RTD types plus YSI 400 series thermistor (medical applications)
Full function 4 to 20 mA read, source, simulate and read/ power modes with 0.015% reading accuracy
Source 0 to 10 volts or read 0 to 20 volts with 0.015% of reading accuracy
Measure 0 to 250 VDC or VAC
Direct keyboard entry allows for quick output changes
Store up to nine setpoints for each output function
RS232 Interface
RTD function works with all pulsed XMTR's
Specifications:
T/C Ranges: J, K, T, E, R, S, N, B, L, U; 10 to 70 mV
RTD Ranges: Pt385 (100, 200, 500, 1000O) Pt392, JIS, Ni120, CU10, YS1400
Ohms Ranges: 0 to 400.00 and 400.0 to 3200.0
mA Range: 0 to 24.000 mA
Voltage: (Low) Input/Output 0-20.000 V (High) Input only 0-250 VDC or VAC
Frequency: 0-1000.0 CPM; 0-1000.0 Hz; 0-10.00 kHz
Continuity: 0 to 400.0O, audible tone when under 10O
Accuracy: T/C Type J: ±3C ±10 µV (± 0.6°C total error)
RTD PT100: ±1°C ±0.75O (±0.3°C total error) 400O: ±0.1O; 4000O: ±0.1O
mA Compliance: Up to 1000 O load
Drive Capability: 1 mA
RTD IEX-range: 0.01 mA to 3 mA
RTD Freq. Response: 10 mS - works with all pulsed XMTR's
Power Supply: 4 AA alkaline batteries, 25 hours typical operating time
Dimensions: 7.5" x 4" x 1.5"
Add